Raspberry Pi DC Motor H-Bridge Driver Block SFunction

DC Motor Driver Block using Soft PWM of WiringPi Library
4K Downloads
Updated 22 Aug 2014

View License

Editor's Note: This file was selected as MATLAB Central Pick of the Week

Motor Driver Block using Soft PWM of WiringPi Library.
This block controls both the magnitude and direction of a DC motor with an H-bridge such as the DRV8833 or the SN754410 using Soft PWM of the WiringPi library.

The reference zero speed is set with high voltage at both motor terminals (both PWM signals at full duty cycle). For the DRV8833 driver this creates a highly linear response and eliminates the typical dead band around zero speed. This increases motor response but may have a larger power draw (this has not been measured).

More information can be found at our website, along with other device drivers:

http://minseg.webs.com/downloads

A complete Arduino library and curriculum is available here:
http://minseg.com/pages/downloads

Other driver blocks on the way:
- Quadrature encoder
- MPU6050

Stay tuned!

This development is part of the Mechatronics curriculum at Rensselaer Polytechnic University

Cite As

Joshua Hurst (2024). Raspberry Pi DC Motor H-Bridge Driver Block SFunction (https://www.mathworks.com/matlabcentral/fileexchange/41528-raspberry-pi-dc-motor-h-bridge-driver-block-sfunction), MATLAB Central File Exchange. Retrieved .

MATLAB Release Compatibility
Created with R2013a
Compatible with any release
Platform Compatibility
Windows macOS Linux
Acknowledgements

Inspired by: Device Drivers

Communities

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
Version Published Release Notes
1.1.0.0

updated links

1.0.0.0